Mikuni tm24 jetting

[Slipnride]

I have a 24mm mikuni flat slide alky carb that I was using on a mild mod gx200. Looking to also use on my briggs raptor build with a .380 cam, stock stroke, stock size valves, billet parts... Anyone have any experience jetting similar size mikunis for lim mods/small opens?

 

[Boogie Man Ryan]

for gas 140 main 20 pilot and needle clip in middle. This works great from a dead stop all the way to the top. not sure on alky... My 28mm on alky is 460 main .5 air bleed 35 Pilot,needle clip in center.

 

[Slipnride]

Gotcha, thanks for the info. I'm planning on getting an hl348a eventually but wanted to play with the mikuni for now but wanted a place to start.