Need help on getting spark!!

125ccCrazy

Well-Known Member
#2
if the plug is bad it could be arcing inside or grounding out...Your body will feel the voltage at a lower rate than what it takes to fire the plug, are you getting zapped hard or just a tingle?
 
#5
Take off the pull cover and sand the rust off the flywheel magnets and coil. Make sure the gap is not bigger than the width of the business card. If that doesn't work than take the flywheel off and clean the points. If that doesn't work, change the condensor and points. If that doesn't work check the spark plug wire for resistance.
 
Top