Put a mikuni on it

[Therepairist]

Could I stick a 19mm mikuni on this? They say the center to center on the intake is 46mm. The mikuni is 48mm

 

[roccosbike]

Yes I believe you could

 

[massacre]

Will the angles be correct?
What engine is this going on?

 

[roccosbike]

Will the angles be correct?
What engine is this going on?

I think he wants to put it on a 5hp Briggs engine....yes it will work, sometimes you have to file the holes out a little with a round file is all.

 

[massacre]

I think he wants to put it on a 5hp Briggs engine....yes it will work, sometimes you have to file the holes out a little with a round file is all.

Gotcha

 

[gasgas300]

I need a manifold to put a mikuni on a briggs 5hp flat head u think this will work ??

 

[roccosbike]

I need a manifold to put a mikuni on a briggs 5hp flat head u think this will work ??

It depends on what carb you want to use. The taper bore 22mm might not IDK never tried one on that manifold but that 19mm he is talking about will, I have done this already.