I recently picked up an Azusa frame for a great deal. They are far from my favorite but since I picked it up so cheap I figured I’d try to modify it to show off a new venture of mini bike fab I went for. I had new axle tabs laser cut with BSE(Brads Small Engines logo) in them with disc brake bracket. I also sourced a set of original forks and had new tabs laser cut to lower the front also. I am using an Azusa Tri star rear wheel I’ve had on the shelf for years with split sprocket adapter. For the front I have a small 3 spoke scooter front. I set the ride height to 1.5 inches in the rear and the front will be right at 1 inch So it’s safe to say I won’t be carving any corners with it. My goal is to build a budget drag chassis for someone looking to get into mini bike racing. I will add more pictures as i continue to make progress on the build.
Attachments
-
749.4 KB Views: 45
-
1.2 MB Views: 48
-
630 KB Views: 44
-
470.5 KB Views: 41
-
623.7 KB Views: 50
-
668.5 KB Views: 51
-
763 KB Views: 45