Tecumseh H35 throttle linkage???

K

KMR

New Member
#1
#1
I ordered a mini bike throtlle linkage, but am trying to understand what I am missing on the current set up. I have searched and looked at several posts and photos. Here is my issue. The lever that is on there seems to be hooked up, but when i move it up and down. The throttle does not move. This is the set up.
A40B5290-E4ED-4F2F-8181-F1C72693A861.jpeg . 3325D036-D075-4593-B894-B6670CFF7665.jpeg

A747EA5D-366C-4118-A358-0A9C7D353E0E.jpeg A747EA5D-366C-4118-A358-0A9C7D353E0E.jpeg

Can someone advise what is missing?
 
K

KMR

New Member
#3
#3
Ok. When it is running, the throttle its self does not move or increase speed. I can move lever up and down. Engine speed stays constant.
 
danford1

danford1

#12
#12
KMR said:
View attachment 101219 View attachment 101220
Click to expand...
I've used a couple of these before. They work great. The long spring pulls on the governor arm. The arm has multiple holes. You have to experiment to get the hole that allows it to idle yet gives it a lot of throttle at WOT.
You can hook your twist grip cable right up to the bracket. Use a cable stop to hold the inner throttle strained cable on the moveable arm.

Danford1
 
Last edited:
K

KMR

New Member
#13
#13
So I am going to install the new throttle linkage later today. Upon inspecting the linkage and preparing for install I see there is a stop tab. I looked at several photos of of these installed and It appears that some people have this tab bent over and others left as is.
DD8D6EA9-1536-4CBB-85E0-C0A56F44BC9D.jpeg 478107B6-1503-40B7-96B7-1B0A07855093.jpeg F0AB16BA-6197-48C6-ACBE-376F34862B7E.jpeg
 
markus

markus

Well-Known Member
#15
#15
You must log in or register to reply here.
Top