tecumseh h70 crank shaft

[iowapitbike]

i need a new or used in good condition crankshaft for a h70 tecumseh motor. must have a 3/4 inch shaft and be keyed. lmk if you have one

 

[joshhoward]

Hey Iowa

I looked all over the webb trying to find it. Im going to call a local lawn mower shop to see what the problem is. I cant find it on the net. Ive been busy the last couple days but ill try again tomorrow.


Josh

 

[enigma]

I have a whole H70 that I was going to build up, but the flywheel got knocked over and broke a fin. Are you interested in a whole H70 or just crank?

 

[iowapitbike]

i only need the crank but if you only want to sell the whole motor i would buy that too. what is the full model number on it. How far does the shaft stick out of the case. Is it keyed and 3/4 inch diameter.

 

[enigma]

Full model # is H70-130101A, shaft protrudes 2 1/2" (engine, not mine!), yes, 3/4" keyed

 

[enigma]

i checked the pn from your motor and mine for the crankshaft and yours wont work. my shaft sticks out 2 1/4 and yours is 2 1/2 my clutch wont work right on yours

what kind of clutch are you running that 1/4" makes such a difference?