Hey all, found a pic of a mini I built for a good friend of mine. He supplied the engine and exhaust, and I did everything else. The frame looked like a Bonanza but not sure. It has foot control on both sides, one for the brake and the left hand is for the shifter. I used a second hub on the RH side and cut down a sprocket to use as a brake rotor. That's a 90cc auto, has a 12volt A/C system with a Yamaha shunt A/C regulator which is under the seat, and that is a large bicycle seat. The CDI box, coil, and wiring is all in the custom made aluminum box. That is also a custom made fuel tank. It's a blast to ride and likes to wheelie a lot. I like to do some different and off the wall stuff sometimes. Thanks for looking.
VERY custom mini
- Thread starter bubba297
- Start date
