I have been riding some very rough trail lately requireing 1 or 2 mph speeds sometimes and it is hard to ride while sitting down at speeds slower than about 6 or 8 mph. Somehow when standing you can steer and balance like on a bicycle mountain bike or a real dirt bike motorcycle. I need the pegs to be about in line with the front of the rear wheel. I have a friend is a great welder, so that will not be a problem. I wanted to ask if anyone knew of good sources of hinged foot pegs that are easy
to fabricate weld mounts and that DEFINITELY have a pronounced rearward fold direction so that if any obstacle is encountered while riding they will fold back and up.
I actually tested this a little bit as I was able to stand on the front edge of the bottom frame lined up at about the front of the wheel or where the kick stand is located.
I was able to ride super slowly with much greater precision.
to fabricate weld mounts and that DEFINITELY have a pronounced rearward fold direction so that if any obstacle is encountered while riding they will fold back and up.
I actually tested this a little bit as I was able to stand on the front edge of the bottom frame lined up at about the front of the wheel or where the kick stand is located.
I was able to ride super slowly with much greater precision.