Have a hole in one of my front struts, so I need a pair to rebuild. Looking for a set from an old MB165 or MB200 someone can part with for not too expensive.
Will replace the seals, but fasteners must be in good shape, not butchered & holes (for axle, etc.) must be good still to work with. Don't need a bad set with pin holes or actual damage, splits or bends.
Found what I needed in town, disregard post. Thanks, tim
Will replace the seals, but fasteners must be in good shape, not butchered & holes (for axle, etc.) must be good still to work with. Don't need a bad set with pin holes or actual damage, splits or bends.
Found what I needed in town, disregard post. Thanks, tim
Last edited: