Will this shocker come apart

delray

Well-Known Member
#6
recoil i don't know if this will help or not? my shock is little different looking. one end threads off and then i can use a long extension and socket to reach inside the tube and undo the nut.

 
#8
recoil i,m not sure but if you look at the casting very closely i think it looks like one end has a pin in it .the lower end by the tire,it looks like it is pressed in and machine off on contour. maybee try to press the pin out ,i have two scat,s and the both have pind in them .let me know how you make out .good luck:thumbsup:
 

delray

Well-Known Member
#12
awesome:clap: little different then my shock. but still the same concept:thumbsup:
good pictures to save. never know when someone else will run into that kind of problem:thumbsup:
 
Top