couple more pictures added to my project,but far from being done......:doah:
fab up small bracket behind the engine mount for holding the brake unit and to keep the snow out from the bottom.
trim up up the jackshaft plate so the torque converter can clear. also the reason i went with this style torque converter/cover, because this style cover completely covers the mounting plate and belt. going to make a new fiberglass cover just like the original cover,but without the small holes. keeping all the snow out of the torque converter.
rear track is all setup now and also built a control arm that is mounted to the front part of the track unit side plate to keep the track unit straight when riding. control arm is mounted on the right side front. don't have a picture of that yet...:doah:
moch up picture of it. i no longer have the front ski on it. i will have to fab up a wider and flat style ski.
also going to have to fab up some skid plates on the side of the track unit and maybe in front of it to help balance the bike better when riding it. so you can see there is a ton of things i have to do still if i want this thing to ride real good and to handle real nice in the snow at higher speeds. just not going to happen this year...:doah:......:no: