Picked up this 1966 5hp Briggs off of an old chipper. In the process of doing a complete overhaul to put on my Taco 44. So far the I found the carb to be cracked at the flange and bought a replacement along with gasket kit and electronic ignition to replace the points and condenser. Open to any tips and suggestions from the nice guys, not the snobby “gurus”
Attachments
-
3.2 MB Views: 82
-
2.2 MB Views: 85
-
3.8 MB Views: 84
-
4.1 MB Views: 90