Search results

  1. Edric10

    8,000 plus rpm's

    need to go faster
  2. Edric10

    8,000 plus rpm's

    my tire size is post on the first page
  3. Edric10

    8,000 plus rpm's

    so still asking the? what gears do yall think i should go wit:scooter:
  4. Edric10

    8,000 plus rpm's

    yes
  5. Edric10

    8,000 plus rpm's

    well what gear do you recommend im running 12t on clutch an a 60t rear sprocket
  6. Edric10

    8,000 plus rpm's

    i got a mini tech
  7. Edric10

    8,000 plus rpm's

    i just think i need to change this head out and fine tune the carb with some different jets an mybe change my sprocket any clutch T an sprocket T recommend to use im running 12t clutch 60t sprocket
  8. Edric10

    8,000 plus rpm's

    from 4,000-8,000 im piss because now they offer a head with bigger valves with the black mamba cam an carb kit
  9. Edric10

    8,000 plus rpm's

    im sorry I mean bullet connecting rod so do anybody got more info on how i can get 8,000 rpm's :thumbsup:
  10. Edric10

    8,000 plus rpm's

    they got this full roller head with roller rockers im thinking bout getting
  11. Edric10

    8,000 plus rpm's

    yea i already got the 14cc in there forgot to put tht on the list too, yea we been doing a lil riding but im tryin to get the max out my motor before going to a big block any idea's any one
  12. Edric10

    8,000 plus rpm's

    I have a clone motor already built but im tryin to get 8,000 plus rpm's out of it. Its 6.5 clone with molly connecting rod, 1:3 ratio rockers, molly push rods, i think 22 or 23 pounds valve springs, blk mamba cam 2.75, 22mm mikuni carb with 22.5 polit an 130 main, mikuni fuel pump, 12t bully...
  13. Edric10

    clone not getting rpm's

    great im running bck right i just put tht 120 main an 22.5 polit in an tune tht mikuni took it for a run did a plug reading burning golden brown im hittin bout 7100-7300 rpm's but im not done i want more i got a 130 main an also 12.5 polit im tryin to get all i can get any idea's wht else i can...
  14. Edric10

    wassup nick this edric from saginaw remember i was having them carb problems after putting tht...

    wassup nick this edric from saginaw remember i was having them carb problems after putting tht blk maba cam in give me a call 989-332-3907
  15. Edric10

    clone not getting rpm's

    mikuni 22mm carb
  16. Edric10

    clone not getting rpm's

    ok i just got my mini out of storage so here we go again this is were im at just put a new main jet 120 in an a 22.5 polit in its easier to start now took it for a test run im still only hittin 3300 rpm but it idles real good an start up easy
  17. Edric10

    saginaw mini bike drags

    wassup my friends im bout ready to pull my mini out of storage hey Nick im still gone need tht help buddie an wassup Eric
  18. Edric10

    saginaw mini bike drags

    So whats been up with everyone :thumbsup:
  19. Edric10

    saginaw mini bike drags

    Ok Nick thts sounds cool to me
  20. Edric10

    saginaw mini bike drags

    Its got to be in them carbs just need help coming up wit something
Top