corrosion

I have this old comet 20 series driven unit that is 40 years old and I can not get the cam off..... I removed the 3 allen screws ( which should be like a retaining clip on new drivens ). Not sure if it is stuck from 40 years of corrosion or it was never meant to come off. What do you guys...

What are you guys using to clean aluminum? I have some Rupp wheels that have turned white,I can put them in the bead blaster,but if there is something I can soak them in and remove the corrosion I would rather.I know that on some old car parts,namely zinc and aluminum tag plates,I soak them in...

Hi. New here and may have messed up my first post. I think I attached a photo but not sure. Anyway, I am restoring two '71 QA50's for my kids and have an issue. On the bottom side of the carb there is a tube pressed into the carb body below the float. This may be a vent but could be a plug...

New Old Stock Rupp tail light assembly's. Genuine KD lights, not some knock off repro. These also came on Heald bikes as well as some others. There is water damage (corrosion) on the backing plates due to poor storage. Some of the sockets are shiny clean, some are not. I haven't pulled any of...

Up for sale is a nice set of go power type II's. They have been cleaned and new bearings installed. On the inside of the rim they do have some corrosion. 75 plus shipping.

Anybody use this stuff for cleaning up old bikes? I can't find Evapo-Rust nearby, which I hear is very good.