cracks

Trail horse/blazer fender no cracks . $35 plus shipping

Attached is a picture of a block that is listed on Ebay. Notice what looks like cracks on the inside of the lower case? Would this be something of a red flag? OR, could they be just casting marks from when it was made. Has anyone noticed thses on any blocks you have rebuilt? OR could they be...

These are in great shape, someone painted them silver at one point but I know they can be cleaned up. The tires are firestone kart tires and are in good shape too. I don't need them. There is no brakes or cracks in them. I am looking for 300 plus 25 shipping. Let me know if there is any...

I was just floating around some lawn tractor forums and saw a discussion where a guy said he used a home made mixture of slime to stop some dry rot tires from leaking around the bead of the rim and thru side wall cracks. One guy said he uses canned milk (only.) Some say the use some type of...

I need one in great condition. A few light surface scratches are okay, but no chips or cracks. If it's peeling, then I'm not interested.

I need a pair of rusty fenders for a minibike project. The rims are like 10" so they can't be too small. I dont mind a few dents or cracks. Even if you only have one thats ok. Just post or send me a pic please. Thanks for looking.

I have the frame, forks, wheels, sprocket, brake and clutch cover Frame is good and straight. The only issue is the foot peg mounts are smashed over. I have a set of foot pegs just need the mounts. It is pretty much stripped down. Forks are internal spring. Good and straight. Brand new springs...

6" rim with Carlisle 4.10/3.50-6 tube with dill tube. Tire is slightly used with good tread and not cracks. Tube is also used but hold air. Rim is 5 star mag wheel believed to be trail horse. Rim could use a better cleaning. It was painted whit and black I stripped all off and cleaned. Look good...

Has anyone ever had a Briggs cylinder crack at the bottom of one of the head bolt holes ? My more than mild built 5er cool bore seems to be leaking oil from where the third head bolt back on the left side in between the fourth and fifth cooling fins from the top where the bolt hole terminates...

I've bought several tires in the past that people swore had no cracks/ weather checking, just to get them and take one look to find out that they are junk. Usually a simple look at them will work, but all you have to do is squeeze the tread. Hold the sides together and look around the tread blocks.

Hi, im restoring a few old trikes..right now i have a Alsport TS-110, BGW Tri-Rod, and a Owosso Explorer 800S...The seats all have stress cracks in the tops of the fiberglass seats. The Alsport i believe i used some kind of putty on the chunks/chips in it and cracks i believe i used some kind of...

Hahahaha. 3 wheel cushman

Carlisle Turf Saver[2 indian heads], good tread, cracked sidewalls. Do they have any value, or do I scrap them? I'm not into 100% correct resto. Thanks.