dellorto

Dellorto UA19S, doesn't look as if it has ever been used $200 shipped

Looking for a salsbury 330 driver clutch and also looking for a dellorto ua19s I got almighty cash and minibike stuff to trade Pm me on here or call me at 708 469 8189 Gustavo Thanks guys

Hello there guys Looking to purchase or trade other minibike stuff For a dellorto ua19s Preferably one with the t handle to adjust on the quick :) Pm me here Or call me at 708 469 8189 I have some nos Tecumseh h50s I believe they are Some Rupp turbine wheels I might part with fenders...

i have a spare 24mm dellorto carb, but i cant seem to find a manifold to put the carb onto a 5hp briggs, i wanted to use it in my rupp hustler, any leads would be great, i would get one made, but i dont have acsess to anything atm, id rather buy one :)

I have a 1969 Rupp Roadster that I am adding a original Dellorto UB22 to. There are two set screws, what are they for (low speed / high speed)? Also how many turns out is a good starting point for getting in the bike running? Any help would be greatly appreciated.

Brand new, never used complete Dellorto UA 19 S. $275 shipped.

I have a 55cc engine in my Yankee Boss. It has a Dellorto UA-19S carburetor. I found a NOS Dellorto UA-16S. Can it be used ? It looks the same. The ad lists engine from 49cc-125cc. Thanks

For sale is a used Dellorto UA19S with intake manifold from a 4 h.p. Tecumseh motor (I was told). I bought a 1971 Rupp Scrambler, which came with it's "original motor" (I was told) that had this carb. attached to it. I've never used it and don't know whether or not it is functional as it is...

Anyone with any experience running this combo? How does the UA16S do on an H40? Thanks. furyus

I'm looking for a Dellorto for use on a HS40 or HS50. Prefer one with an intake, cable and stack, but will consider any and all. Shoot me an PM if you have one I might be interested in. Thanks for your time. furyus

Hey guys, I need a Delorto (spelling?) throttle for a 1960's vintage trail bike restoration. I'll try to get a picture of it, but it is recognizable by the cable running parallel to the hand grip. It's for a 7/8" diameter handlebar. Thanks, Don

Looking for dellorto parts for Rupp Minibikes choke enrichner lever and cover

dellorto RUPP-BLACK-WIDOW-CARB

so i bought the correct carb for my blackwidow, since it didnt come with one. i bought everything. carb, megaphone, intake, and throttle cable all for $20. it is the UA19S carb. now. my question is. what is the little lever ontop of the carb where the throttle cable comes in for? mine can just...

I'm planning to use this Dellorto UB 22 S on a Tecumseh HS 50 for my Rupp BlackWidow Clone project. I could use information on getting a service kit, settings and any information on how to tune/rebuild this carb. Dellorto UB 22 S

Brand new Tecumseh HS50 shortblock with ball bearing crank. Comes with original box & gasket set also including intake and exhaust laser cut flanges to use as adapters so an HS40 slant intake can be use or make a dellorto intake. This uses the old style points and still has the tape on the...

I really don't know where I should post this.. and it's probably not worth posting? The audio sucks because of my digital cam microphone doesnt like loud things, and it was getting dark. Anyways I got some time to tinker with my newly aquired Dellorto UA19S I just cleaned it up and stuck it on...

I am looking for a nicer dellorto air cleaner cover. Mine is in bad shape although I did bondo up the hole but it still looks like crap because of all the pitting. If you have a cover like whats in the pic let me know... They also made these in black plastic which will do as well.

Hers a few more goodies that have just been collecting dust on my shelf. Performance Tecumseh parts 1-stock star Cam (hm100 10hp) 1-Dyno cam for a star motor wil fit in HM80-HM100 Grind # 98, for the open class. with matching springs, billet retaners, and lifters. 3- sets of new HD...

i know its not a mini bike, but i have had a DBM 50 for about 3 years. about 2 years ago the carb went and becuase DBM is out of buisness i cant buy a new one. i think that the part where is attaches to the motor is 18mm i think, im not sure. but heres a couple pics.