killing

So today I spent about 5 hours taking the governer out of my predator 212 on my baja mini, it was not nearly as easy as I thought it would be. So now that it's all put together, I have a problem, it will not start, and every few pulls there is a very loud pop noise that occurs, any idea as to...

My Bird Romper 3 wheeler has i think a cat 99 tork a verter.Before I disassembled everything it seemed like the driven wasnt working right.Seemed to be opening too soon and killing the power but im not sure.What would i look for visually to inspect? Im about ready to put the engine back on and...

The old Tecumseh/Craftsman/Lawson what ever the hell it is that was on that free Rupp kart i picked up has no spark. I think most of you have established it's a 1963 H22 2.25 HP Tec. This exposed wire is the black wire that screws down into the left side of the points comparment (The other one...

When asked why he did it, he said he was stumped. :shrug:

I just copped the Harbor Freight 6.5 because my gx160 block cracked due to rod failure. I tore down and race prepped the clone last week. Installed the following parts S1 aluminum flywheel weisco flat top piston ARC billet rod bored .625 carb w/ 92 main, gx140 emulsion tube, HF airfilter...

Im hoping you guys can help me out. Ive got a 6hp tecumseh powersports OHVmotor that im hopimg to use on my bike. But i for some odd reason..SOMTIMES under a load. It trys to cut off.. First i thought it was the carb.. So i rebuilt it.. NO Good.. Then i still thought it was the carb.. Replaced...

I am putting my 5hp flatty back together and it was holy hell removing the valve springs, and now I can't get them back on. What is your guys' secret to doing them?