I came across this method for fastening cable ends:
Bowden Control Cables (making, repairing, or modifying control cables) -
Looks really good to me, and brass is nice to turn on a lathe when you need to make the ends themselves. Sorry if it has already been discussed here.
Time has come for me to do a few engines where the exhaust really does need to be painted same as the engine for the most "stock" appearance. I am starting on a white side exhaust for a customer for a Barris that uses the big flat round muffler and I have 4 1967-1969 (2 H35 and 2 HS40's) that I...
Like a big dummy:doah: I didn't take them out before I got them blasted. Now they have grit in them . The very first one I tried to get out is giving me fits. Trail horse alum mag. I have tried my old stand by method of using a deep well socket from behind and punching them through with a rubber...
Maybe this has been gone over before, Just thought this might help someone out. For solid rims, I put a large punch or other suitable object in the vice and set the tire rim down over it. A vice grip on the bottom of the rim against the vice somehow will keep the rim from turning, while a vice...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.