vibrations

TAV 2-30 driver weights in vibration mode.

I installed a Predator 6.5 on my Dirt Bug using the adjustable mounting plate and tried to align the clutch and rear sprocket as best as I could. I also pushed the engine as forward as it would go to kept tension on the chain. When it is idling, there is some clutch noise, and when I turn the...

I bought a new warrior a few months ago. Some mods are definitely needed. First I replaced the squealing brake pads with Honda's equivalent. Much better. The spring setup threw me for a loop, but I got it figured out. Something was funky with the master link on the chain when I took it off. The...

I'm spinning my gx200 to ~6K with an ARC long rong, honda flat top, and ARC billet FW. Stock crank. ~11:1 comp on gas with +6 timing. To anyone else running this combo or close, how would you describe the vibrations you feel? My bike seems to vibrate harder(magnitude) than my harley...

does any one know how to get rid of chain vibrations it will be good at a very low speed and while getting up to speed it will be the roughest ride and the whole thing shacks and sounds like something will break then when i get to full speed every thing smooths out does any one know how to fix...

Hi i just converted my dirt bug to a 6.5 hp engine and the chain seems to be perfectly alien. i have allot of chain vibration for some reason and i cant figure it out i know its my chain because i look down and i can see it slapping around its pretty tight on there but im not sure if i should go...

Well I oiled my clutch, put spacers on my handlebars, tightened all my engine bolts and sill had a bad vibration,,,, all the way up to full speed. The cure: Clutches,Chain,JS Parts Scroll down Make your clutch perform like a more expensive race clutch! Black Clutch Garter Spring Fits Max -T...

my doodlebug when im riding the handlebars vibrate, i was wondering if i could put something on them or put new handlebars that would absorb the vibrations?

I have been working on a trailhorse, with a Tec h35 that I recently rebuilt. I took it for the first test run this afternoon. It installed a new chain and new wheel bearings as well. When I go easy on the throttle everything sounds about right. The engine runs clear and smooth, but if I get...