I've had this thing for over 20 years and first time i rode it was last fall. It does run and drive(2 speed automatic does work). It does need a recoil so i use my power drill to start. The bike is mostly complete, i even have the original tires for it. smooth running bike. I'm not really sure...
So I got my hands on this Artic Cat Whisker Mini Bike Model #2328-001. I haven't tried to fire it up yet, I thought I'd try to figure out what it's worth first. It's pretty rough but is 100% original and complete, down to the decals. Any idea what it might be worth as is, or of i get it running?
can anyone post a pic of where the trans fluid goes in and where to check it at? and where to drain it? its a sax 47cc. also which chain size goes on the bike?
i tried #40 but is too wide? #41 the right size? also two wires comming out of the bottom of the engine, one red, one black. the red...
Well that about sums it up, I have a '72 Arctic Cat Whisker with a Sachs 47cc and I've looked all over the internet and I need to know if 85psi is good compression or what it should be.
[/IMG]
Well that about sums it up, I have a '72 Arctic Cat Whisker with a Sachs 47cc and I've looked all over the internet and I need to know if 85psi is good compression or what it should be.
Where exactly is the head gasket located ? Is it at the top most section of the engine ( 4 bolts hold it down ) or is it lower where it tapers into the carb area ? I don't recal seeing a gasket when I removed the top most portion to inspect the cylinder head ... this may be my low compression...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.