wtb:

Non lighted, 4hp engine wanted...(White) Thanks!

Anybody have one to sell me!!?? Just like this one.

Alright, so looking for some stuff for my 1970 rupp sprint. Things I need: gas tank, seat cover, foot peg grips, throttle grips, rear shocks, H35 Tecumseh muffler, and doubtful I will find one, but a clutch cover. Just respond to this thread or shoot me a pm. Also if anyone has little random...

Hi, Looking for a fuel tank for my bike, it looks like the one on the bike pictured below. Thx Mike

I am in search of a carb for my 3hp briggs. I have a remote fuel tank so the carb needs to be the one that does not have the tank attached. Thank you in advance.

Looking for a front and rear suspension Rupp 500 or similar roller. No complete bikes please.

Looking for a front and rear suspension Rupp 500 roller. Please no complete bikes.

I'm looking for a greyhound clone sidecover. It is a bit different gasket seal in the cam area. Here is a picture of what im looking for. Will give up to $30 shipped A

Hello, I have an ARCO frame that is in pretty rough shape. The engine plate is junk and the forks are "high speed" forks with re-bar welded down the sides. I would rather start with a nice set of forks that are not bent, than to grind off all the rebar and try to straighten them. Something...

Wrecked the front end on my Quasi-Stellar this weekend due to a broken handle bar. Broke free during a test run.... :doah:

Hey Guys, I haven't been on here in quite some time but I'm looking for a running bike to purchase for a few camping trips this year. I'm in the Cleveland area and will travel within reason. I'm looking for something vintage with a nice Tecumseh or Briggs. Not super picky but something that...

I am trying to get a Harley X90 up and running for my son, and I am needing some parts for my X90 Carb. I really just need to the throttle slide, but it is discontinuted. So I guess I will focus my search for a new carb insted. If anyone has one that would work....I don't care if it is the...

Looking for a complete and clean Lil Indian frame. Don't need wheels or anything, just forks and frame itself.

Looking for a roller of either style I'm hoping to find one locally but will consider other means. These things usually pop up all the time in my area dirt cheap :doah: ,but of coarse now that I need one :doah: Let me know if you have one thanks Mark.

I need hubcaps 6 ASAP but 12 if available and I need front forks complete I know it's a lot to ask but if any one has the switch plate I will buy a few I'm looking for the stock brake setup for these bikes I have 4 as of now but will be getting more so I will need parts anyone please call or...

The cam I use has no compression release, and I knew the starter I had would be short lived. It let out the magic smoke today(and a lot of it!) and now I gotta replace it. Anyone have one sitting around for sale? WTB!

WTB: 1960's or 1970's Tecumseh H50 Engine, pictures and prices please. Thanks in advance

WTB: 1960's or 1970's Tecumseh 7hp Engine, pictures and prices please. Thanks in advance

Always wanted one! Let me know what you have... Complete or roller is fine. Thanks!

Need a Rupp front fender from a 6" wheel bike....I guess a Continental, C350, Roadster fender will work...not sure what other models came with the same style...should have mounting tabs on each side. Please PM if you've got one... KK .