26mm mikuni carb

[gibroket08]

When I give it gas it like to pour lots of fuel out of the vent tube but at idle it is dry and doesn't leak? I pulled the bowl off to look at the float seemed to be working properly. If anyone has any ideas that would be great the jet is a 130 main and 17 pilot.

 

[sparkwizard]

What engine? Where is the vent tube mounted to the carb, and where are the pictures?

"when I give it gas" can mean so many things in this interweb world. If that means "when I turn the fuel valve on" is not the same as "when I open the throttle.

 

[SAS289]

Are you sure it's coming out of the vent and not the overflow?

 

[gibroket08]

What engine? Where is the vent tube mounted to the carb, and where are the pictures?

"when I give it gas" can mean so many things in this interweb world. If that means "when I turn the fuel valve on" is not the same as "when I open the throttle.

when I blip the throttle to around 2k rpms fuel comes out the overflow tube

 

[gibroket08]

Are you sure it's coming out of the vent and not the overflow?

my mistake meant overflow. could it be the float valve needs to be properly adjusted?

 

[gibroket08]

the engine is a duramax 208cc stock except for a header and governor removal and now the Go Power sports aftermarket 26mm Mikuni

 

[SAS289]

About all you could do is change the float adjustment. Are you using a fuel pump?

 

[gibroket08]

About all you could do is change the float adjustment. Are you using a fuel pump?

no no fuel pump just a fuel line with a filter. I will try to adjust the float .

 

[ole4]

Do you know how to set float level.