5hp Briggs or Tecumseh flathead wanted
- Thread starter Strigoi
- Start date
Briggs
I have a Fresh 5 HP on the shelf. I'll list everything as good as I can
5H.P Bushing / Bushing Engine
3/4 keyed shaft
Valves where lapped and seats where checked
Std. Bore W/ new rings
NEW Briggs Racing Raptor Rod
Assembled Professionally---------> By Me
All Gaskets and seals are new Briggs Racing Parts
Cam and lifters are stock briggs
Block is ported and clearance around valve pockets, the intake and exhaust ports have been ported as-well.
All the tins are on the engine as-well as a recoil starter.
Carb has been rebuilt and jet has been changed to a 36
Tank is clean and rust free, All carb to tank gaskets are new
This is a Points engine. The points and condenser are new, and the flywheel key is new.
This engine is complete. You will need exhaust,airfilter and gas. Nothing else.
This was built for a project but when the time comes I'm going to try a briggs animal or a clone. I'll add up the parts I have in it and then determine a price.
Randy
I have a Fresh 5 HP on the shelf. I'll list everything as good as I can
5H.P Bushing / Bushing Engine
3/4 keyed shaft
Valves where lapped and seats where checked
Std. Bore W/ new rings
NEW Briggs Racing Raptor Rod
Assembled Professionally---------> By Me
All Gaskets and seals are new Briggs Racing Parts
Cam and lifters are stock briggs
Block is ported and clearance around valve pockets, the intake and exhaust ports have been ported as-well.
All the tins are on the engine as-well as a recoil starter.
Carb has been rebuilt and jet has been changed to a 36
Tank is clean and rust free, All carb to tank gaskets are new
This is a Points engine. The points and condenser are new, and the flywheel key is new.
This engine is complete. You will need exhaust,airfilter and gas. Nothing else.
This was built for a project but when the time comes I'm going to try a briggs animal or a clone. I'll add up the parts I have in it and then determine a price.
Randy