another clone ???

[johnf.357]

I have a bone stock clone on my kids race kart (just for playing)I am leaving it that way,but was thinking that I could change the carb jet,and the em.tube,and air filter for a bit more spunk...and not much cost..the govenor is staying it's our friend!!!

would it be a good thing if I put in 18# springs or waste of time??

thanx Boy's

 

[C9H13NO3]

Yeah, the springs will let it rev just a teeny bit higher than normal. I would stick with the stock carb until you get a bigger cam. Are you going to add a header? The emulsion tube really helps with low end power.. I'll swear by it.

 

[johnf.357]

no,I did have the header on it.But I installed a muffler system,to keep her quiet..My boy has an awesome spot to ride.My sister lives on a dead end.And don't wanna piss anyone off.

this is my build below fo rmy kart...only bout 1/2 way there..


hillbilly header
vs 22mm slide carb.jetted
uni air filter
govenor,ect removed
gecker magnum blue print clutch
arc rod w/inserts and billet fly wheel
hp valve train
ported and polished head