I grew up with this Attex and a 8 years ago I set out to fix the wiring and 8 years went by and now I have no idea on how to put it back together. (slaps forehead). Lucky for me it looks like I have all the parts. The photos show all the wiring. I believe the multi-switch is the hub for all the wiring.
I am fairly certain the headlight and rear light have been replaced, a previous multi-switch melted from the inside, the one shown is its replacement. I have labeled all the connections on the multi-switch (1-5). 1 is in the toggle, 2 connects to the top button (I think this is the kill switch), 3 4 5 & 0 connect to the toggle via a spring in the toggle (3 & 0 are connect, no wire can connect to 0), 6 connects to the side button (which I think is for a horn, which I do not have). All of the wiring photos have labels with alphabet characters.
I would greatly appreciate it if someone could help me out.
I am fairly certain the headlight and rear light have been replaced, a previous multi-switch melted from the inside, the one shown is its replacement. I have labeled all the connections on the multi-switch (1-5). 1 is in the toggle, 2 connects to the top button (I think this is the kill switch), 3 4 5 & 0 connect to the toggle via a spring in the toggle (3 & 0 are connect, no wire can connect to 0), 6 connects to the side button (which I think is for a horn, which I do not have). All of the wiring photos have labels with alphabet characters.
I would greatly appreciate it if someone could help me out.
Attachments
-
1.9 MB Views: 23
-
1.6 MB Views: 24
-
1.9 MB Views: 24
-
1.2 MB Views: 22
-
960.4 KB Views: 20
-
1.7 MB Views: 17
-
1.8 MB Views: 19
-
1.4 MB Views: 19
-
1.5 MB Views: 21
-
1.2 MB Views: 20