bonanza CR 500

[tim ryan]

looking for info on jack shaft gearing for the Hodaka ace 100. And where to buy them gears shaft bearings well all of it.Thanks

 

[tyleryamaha]

looking for info on jack shaft gearing for the Hodaka ace 100. And where to buy them gears shaft bearings well all of it.Thanks

Bonanza Hodaka gearing - 14T on motor to 9T jackshaft other side of jackshaft 18T to 60T on rear wheel. I got this info from friends original survivor bike.

 

[tyleryamaha]

Forgot to mention those gears are for the BC Hodaka bikes.

 

[tim ryan]

Bonanza Hodaka gearing - 14T on motor to 9T jackshaft other side of jackshaft 18T to 60T on rear wheel. I got this info from friends original survivor bike.

Bonanza Hodaka gearing - 14T on motor to 9T jackshaft other side of jackshaft 18T to 60T on rear wheel. I got this info from friends original survivor bike.

Yes. thank you, i building one now. i know the Hodaka is a 420 chain where can i get these parts. thanks agian

 

[tyleryamaha]

Yes. thank you, i building one now. i know the Hodaka is a 420 chain where can i get these parts. thanks agian

You should be able to use #40 chain on the counter shaft sprocket of the Hodaka engine.

 

[tim ryan]

You should be able to use #40 chain on the counter shaft sprocket of the Hodaka engine.

I sea what you're saying. so i will get #40 jack shaft gears, thanks

 

[tyleryamaha]

I sea what you're saying. so i will get #40 jack shaft gears, thanks

OldMiniBikes Warehouse should have what you need

 

[Havasu Dave]

I plan to use #41 chain on my 420 drive sprocket, and #41 jack shaft sprockets. Correct me if I am wrong.

Note: If you are going to use #40 chain, you can use the #41 sprockets, and they are easier to find in a wider variety of sizes.

 

[tim ryan]

Thank you Dave, that helps , nice build you got there

 

[Havasu Dave]

Thanks Tim, I look forward to seeing your CR 500.

 

[tim ryan]

Yes, i wish i new how to post pics, it will not let me