Bonanza MX1510 Seat Height

[MX1510Jim]

I'm restoring a MX1510 Bonanza. I'm working on the seat now, just found the 14" long seat pan. How tall was the seat? I'm trying to determine how thick the foam needs to be and the height of the seat.

 

[superflea]

Foam needs to be high enough to reach your butt when you sit on it.

 

[MX1510Jim]

Foam needs to be high enough to reach your butt when you sit on it.

Looking for the original height of the Bonanza seat.

 

[Midyrman]

This seat was done by Karen.

Note that with the nature of the seat pan the foam part is probably a bit tricky. The top where your butt sits is of course is level. But the bottom needs to be fitted to curvature, indentation etc of the pan. Someone else who has done this could embellish…..

 

[MX1510Jim]

This seat was done by Karen.

Note that with the nature of the seat pan the foam part is probably a bit tricky. The top where your butt sits is of course is level. But the bottom needs to be fitted to curvature, indentation etc of the pan. Someone else who has done this could embellish…..

Thank you!

 

[gobigorgohome]

Be careful who u take your seat too .not any shop can build a seat