Brake cables with 3/8" Barrels for A Heald Trike Needed

[Sixpac440]

Searched here and in the intertubes, not getting anywhere.
Looking for a brake cable where the conduit is 80" (?) at least.
I can trim to fit.
3/8 Barrel is a must.
Who sells them?

Thanks
Kevin

 

[bikesisbikes]

Try these folks. Motion Pro Cable Barrel Fittings - 10/Pack 01-0010 | eBay

 

[Cuda54]

Do you have the old one or is it just missing? I have put new barrels on a fresh cable and used 2 outer cases to reach what I needed. I bought a roll of cable the size I needed and soldered the barrel end on and I solder and about inch of the end so it cannot fray. I bought a 3/8s rod drilled it and sanded to fit then soldered it on. I needed them for my TRI-ROD.

 

[Sixpac440]

I was directed to a source for what’s needed.
I’m a tool and die maker and could make them but it’s easier to buy them when I only need 2.
Thanks amigo!

 

[Sixpac440]

https://www.gokartgalaxy.com/ had everything needed ..

 

[sparkwizard]

My local bicycle shop makes custom cables. He crimps barrels on. There is also a custom motorcycle fab shop that makes custom heavy duty cables.
Might be worth a call to a local shop?

 

[manchester1]

@chatten63

 

[BRACE]

Flanders Co. for cable parts.

 

[wildman]

I've had a few custom brake and throttle cable assemblies made by Motion Pro for my trikes. Not cheap, but I consider pretty reasonable for special order. Quotes are free. Just need a decent drawing or sketch.
Motion Pro custom cable shop

 

[creia]

Flanders Co. for cable parts.

Another vote for Flanders Cable Company from me. ( I'm lucky as I reside in the same city as their shop= Duarte, CA)
http://flanderscables.com/
Michael

 

[Steve73]

Searched here and in the intertubes, not getting anywhere.
Looking for a brake cable where the conduit is 80" (?) at least.
I can trim to fit.
3/8 Barrel is a must.
Who sells them?

Thanks
Kevin

i made my own brakes for my trike from https://www.mfgsupply.com/ i just bought the parts. they are heavy duty! here is my order so you can look up model numbers of the parts in the search box on the website. Hope that helps ya out..