C control4userguy New Member Mar 4, 2017 #1 Mar 4, 2017 #1 Model 75482S-2153D, paperwork included. Series 30 GTC driven unit. Both new. $465 shipped. Attachments 20170304_130055.jpg 4.8 MB Views: 107 20170304_131122.jpg 3.6 MB Views: 121 20170304_131103.jpg 4.7 MB Views: 120 20170304_131204.jpg 4.2 MB Views: 88 20170304_131147.jpg 5.2 MB Views: 66 20170304_124718.jpg 2.4 MB Views: 61
C control4userguy New Member Mar 10, 2017 #2 Mar 10, 2017 #2 Need to turn this into Gilson/Wards parts so lowering the price. $425 out the door.
C control4userguy New Member May 10, 2017 #4 May 10, 2017 #4 On-again, off-again project died on the table so back up for sale. $375 w/o driven, $400 with. Will work with buyer on shipping.
On-again, off-again project died on the table so back up for sale. $375 w/o driven, $400 with. Will work with buyer on shipping.
CLH Member May 13, 2017 #5 May 13, 2017 #5 The 30 series clutch uses a 3/4" shaft, so the shaft must be 3/4" diameter? I wonder how long the shaft is?
The 30 series clutch uses a 3/4" shaft, so the shaft must be 3/4" diameter? I wonder how long the shaft is?
C control4userguy New Member May 13, 2017 #7 May 13, 2017 #7 3/4" D shaft and long enough to hold the unit. I'll throw in the bore & tap for free:shrug: As a last resort, if anyone has a ready-to-run vintage roller, I might still be interested in "exhuming" this project Last edited: May 13, 2017
3/4" D shaft and long enough to hold the unit. I'll throw in the bore & tap for free:shrug: As a last resort, if anyone has a ready-to-run vintage roller, I might still be interested in "exhuming" this project