Harley footpegs for the Baja Heat

joekd

joekd

Active Member
#1
#1
My OEM pegs started to bend downward due to the hollow design, my "gentle" riding style, etc

I picked up a set of Harley Sportster OEM pegs, slightly smaller diameter but a lot better design with a solid piece of metal

Only problem I ran into was that the Harley mount is smaller then the Baja design, easily fixed with a couple washers

Here they are already broken in



Best part is the seller sold me a total of 4 so now I have a spare set as well
 
joekd

joekd

Active Member
#3
#3
If you are interested I'll sell you my spare set for $12 shipped, may even have enough washers and new cotter pins too so it will be an easy swap

They are used but in perfect condition
 
DrGadget

DrGadget

Member
#4
#4
I've had them on my bike for the past 2 years and they're great!I since replaced them with harley styled floor boards and redid the whole bike but thats a good price joekd.:thumbsup:

 
joekd

joekd

Active Member
#6
#6
Oldschool said:
I took a couple of 5/8 bolts and drilled a hole, then ground the ends.

Solid foot pegs that don't bend.
Click to expand...
Not a bad idea but I think I will stick with my way, pay $12 for a product that is solid, bolts right on, has the rubber grips for vibration/traction and still folds up like OEM
 
Oldschool

Oldschool

New Member
#7
#7
joekd said:
Not a bad idea but I think I will stick with my way, pay $12 for a product that is solid, bolts right on, has the rubber grips for vibration/traction and still folds up like OEM
Click to expand...
Mine fold up and use the factory rubbers, hard to see in the pictures but those are bolts man.....
 
You must log in or register to reply here.
Top