I have an old Tecumseh that I believe is from the early 60's. I believe it is an H60 but not sure what the model is to know what parts to get etc. I cannot find any ID on it anywhere. I found 2 numbers cast into the block. They are:
19-0-70
IAI-0-240
This motor has a 3/4" shaft that is straight on one end and tapered on the other. If you need any other part numbers there are a few on the points set and condensor I can post that might help.
19-0-70
IAI-0-240
This motor has a 3/4" shaft that is straight on one end and tapered on the other. If you need any other part numbers there are a few on the points set and condensor I can post that might help.