HELP WITH AXLE ADJUSTER!

[BearMan45]

I got the Bearkat up and running!
However there is no option for a n axle adjuster / block to help the rear axle from moving forward and putting chain out of wack.
Any ideas? I added a thumbnail.
Thanks

 

[Addicted 2 Minis]

If you can weld, weld a nut to the front side of the axle plate, use a bolt for the axle stop along with a locknut, voila!. Here's a shot of a members Hound Dog 400 that shows what I'm talking about.

 

[Addicted 2 Minis]

I guess I should have said jam-nut instead of locknut, also when welding the nut to the axle plate, turn the jam-nut so the flats aren't lined up the same. This will provide spacing for the jam-nut to turn, if there aren't any obstructing for the jam-nut then it doesn't really matter. A hex-cap screw ( Allen bolt ) works better than a hex-head bolt as a stop bolt, less fumbling of tools working in a smaller area.

 

[Richard Trotter]

A different style...

 

[massacre]

That is a cool sprocket

 

[sonerenos]

this style should work for you






you can see how they work on the photo below






let me know if you need a set, i have a few sets left

 

[Fourtogo]

This is my Homlite with axle stops I made . Axle stops in front of axle are best and strongest . A good designed spring loaded chain tensioner is also a big plus

 

[Fourtogo]

Axle Stops