double post, sorry!
Jay Wrix New Member Mar 25, 2009 #22 Mar 25, 2009 #22 that is the shim, and its supposed to go under the intake valve, yes. As long as the valves are setup right I think that it wont matter, put it together, set the lash and see if it works out. If your worried Give NR a call, Theyll help you right out
that is the shim, and its supposed to go under the intake valve, yes. As long as the valves are setup right I think that it wont matter, put it together, set the lash and see if it works out. If your worried Give NR a call, Theyll help you right out
TahoeN New Member Mar 25, 2009 #23 Mar 25, 2009 #23 Cool, Thanks again Jay! Ok, I have another problem..I opened the motor, And I found this laying in the oil, :doah: Last edited: Mar 25, 2009
Cool, Thanks again Jay! Ok, I have another problem..I opened the motor, And I found this laying in the oil, :doah:
TahoeN New Member Mar 25, 2009 #26 Mar 25, 2009 #26 Yeah, It was one of the pins from the gear for the govener that I some how left in there!:thumbdown:
