High Performance clone heads for sale.

[ole4]

I have some clone heads for sale. These are new everest 14cc head castings. They have been ported, and come in various valve sizes from 32x27, 32x25, and 28.5x25. They have all been flow tested and port velocity mapped. the data will be supplied with the particular head. They currently have no springs or retainers. You will need to specify your preference of spring pressure and alloy or Titanium retainers. They will come with lash caps Unless you do not need them. These heads fit the clone engines and hemi pradators. Non Hemi predators have larger head dowels and will need the two dowel holes enlarged. I can do that if you specify it.

 

[chipper]

how much are they ? can you size push rods as well ?

 

[ole4]

Depends if it has one or two seats installed and retainer option. For the. 28.5x25 head with 26lb single springs and alloy retainers $185.00. Pushrod length depends on type of rockers, camshaft and geometry needs to be done with engine assembled. If you are using pedestal mounted rockers like gage or ec roller rockers, you first have to set the valve side geometry (mid lift) by adjusting pedestal height then you need to set pushrod length to set pushrod side geometry. Gage has a very good you tube video on ho to do this. Nr sells an adjustable length pushrod to help determine length.