Knock off vm22 mikuni - Can you use mikuni jets?

[Latent]

Trying to re-jet my pilot jet on my knockoff vm22 mikuni carb, but having a hard time finding a pilot jet that looks the same as the knockoff. I already am using a genuine mikuni as the main jet with no problems. (Large round head)

After looking around on forums for a bit a couple of users are saying you can use the VM28/486 pilot in the knockoff mikunis with the large round N100.604 mikuni main jets. I attached a picture for reference.

I have attached a picture of my pilot jet below as well. The top of the pilot jet has a hex head, with an o-ring just under that. Looks nothing like the VM28/486 pilot. Just wanted to know if anyone else has experience with this, and can point me in the right direction, thanks.

 

[Latent]

Here's a pic I took yesterday

Clocked over 60mph with mild mods to the 212cc. Just trying to get it to idle without the choke on lol. 125 main 15 pilot -> going to 130 main 17.5 pilot, and see how it feels. I’m in northern Colorado at 5000-10,000 elevation while riding. Thanks guys.

 

[Skipp]

I buy my jets at niche cycle...they work in both genuine and knock offs

 

[Latent]

I buy my jets at niche cycle...they work in both genuine and knock offs

Which pilot do you use? Got a link or a picture?

 

[Skipp]

I run 15 in three and in one motor I had to use a 17.5....they sell the ones like in your top photo...pilot jet...hex head on mains

 

[Latent]

I run 15 in three and in one motor I had to use a 17.5....they sell the ones like in your top photo...pilot jet...hex head on mains

Appreciate the help, thank you. What elevation are you running at?

 

[Skipp]

600-700 feet