:hack:Could someone out there help me, i think or i thought i was smart. ive been moddin my gx200 clone ,air filter ,header so i see its time for carb mod. i took the carb off, removed the bowl, then tried to remove the main jet or what i thought was the main jet with a screwdriver ,when that didnt work i drilled it with it still in the carb now it wont start .what can i do to save this oem carb?:doah:
Kruger585
- Thread starter kruger
- Start date
The main jet should be the piece that protrudes farthest down into the center of the float bowl. It still should start, because the main jet doesn't come into play til around 3/4 throttle. You may have another problem. The float may be jammed cutting off the fuel supply. Take it apart and have another look.
