Hey guys i've been away for awhile but im back in michigan now and still got these parts listed left
Clements Rod & Wiseco 1990P100 Was Ran With .150 Stroker Crank
$40
Clements Raptor Billet Head this head was originally used with a girdle but i dont have the girdle that mounts to it just the billet head
$40
Mcgee Honker IV Camshaft $40
ARC Billet Head Wth Built-In Girdle For 5HP Briggs $80
Billet 5HP Flywheel With Removable Hub & Removable Fins $90
ARC 4.475 Rod & Wiseco 1986 .10 Chromed Piston Used For Mock Up Only Also Extra New Set Of Rings $100
Tillotson HL368A Alcohol Carb With Intake For 5HP Briggs & Filter Adaptor LIKE NEW $100
Briggs 5HP stock fun power engine the motor does run good i think it is a really low hour engine.. however it will need the newer style recoil starter it has the newer style crank,i have been using the old pullstart setup an keep breaking starter clutches using it...i do have a drum style clutch on it and could also include a loop header
$140.00
Briggs 5HP Race Motor Set Up For Purple Plate Dual Bearing Red Block Bored .10 Over.. I Believe The Cam Is A Dyno 95-3, I Know It Has Atleast A Billet Dipper If Not A Billet Rod It Has A Curved Header And A #2 Carb On Alky.Motor Looks To Have Just Been Rebuilt!! It acted funny one day on the kart as if it had something wrong with the carb or a timming issue, I took motor off a replaced with aq clone an never fooled with it. 275.00
Briggs 5HP Modified Block Du Bushing Cool Bore Eye Brows Done Spring Pockets Cut Lifter Bores Welded Included New Chamfered Valves That Have Been Sealed And Valve Springs Also, Has Horstman Breather Cover With 2 Hose Fittings And Big Bearing Side Cover And Coil..Needs New Bore Job It Is .10 Now..Me Personally I Would Send It To Have A Sleeve Installed.Im Asking $125 Very Nice Machine Work On This Block!!!
Burris Mini Lite Electric Starter Minus Battery $120 WIth A Brand New Battery $175
Prices Do NOT Include Shipping
LOCAL pickup is even better!! In Ypsilanti,Mi around 30 miles from Detroit.. right next too Ann Arbor
ARC BILLET HEAD WITH GIRDLE
http://i307.photobucket.com/albums/nn307/banks2878/101_2966.jpg
CLEMENTS BILLET HEAD
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0004.jpg
ALKY TILLOTSON WITH MANIFOLD AND FILTER ADAPTOR
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0006.jpg
CLEMENTS BILLET FLYWHEEL WITH THE REMOVABLE FINS
http://i307.photobucket.com/albums/nn307/banks2878/101_2964.jpg
CLEMENTS BILLET FLYWHEEL WITHOUT THE REMOVABLE FINS
http://i307.photobucket.com/albums/nn307/banks2878/101_2963.jpg
CLEMENTS ROD WITH .100 PISTON RAN WITH .150 STROKER
http://i307.photobucket.com/albums/nn307/banks2878/101_2970.jpg
ARC 4.475 BILLET ROD WITH P1986 .10 CHROMED PISTON
http://i307.photobucket.com/albums/nn307/banks2878/101_2968.jpg
MODIFIED BRIGGS BLOCK
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0002.jpg
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0003.jpg
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0001.jpg
BURRIS MINI LITE
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0014.jpg
BRIGGS RACING MOTOR 9HAS LOOP HEADER IN PIC BUT WILL BE CURVED)
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0012.jpg
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0010.jpg
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0011.jpg
Clements Rod & Wiseco 1990P100 Was Ran With .150 Stroker Crank
$40
Clements Raptor Billet Head this head was originally used with a girdle but i dont have the girdle that mounts to it just the billet head
$40
Mcgee Honker IV Camshaft $40
ARC Billet Head Wth Built-In Girdle For 5HP Briggs $80
Billet 5HP Flywheel With Removable Hub & Removable Fins $90
ARC 4.475 Rod & Wiseco 1986 .10 Chromed Piston Used For Mock Up Only Also Extra New Set Of Rings $100
Tillotson HL368A Alcohol Carb With Intake For 5HP Briggs & Filter Adaptor LIKE NEW $100
Briggs 5HP stock fun power engine the motor does run good i think it is a really low hour engine.. however it will need the newer style recoil starter it has the newer style crank,i have been using the old pullstart setup an keep breaking starter clutches using it...i do have a drum style clutch on it and could also include a loop header
$140.00
Briggs 5HP Race Motor Set Up For Purple Plate Dual Bearing Red Block Bored .10 Over.. I Believe The Cam Is A Dyno 95-3, I Know It Has Atleast A Billet Dipper If Not A Billet Rod It Has A Curved Header And A #2 Carb On Alky.Motor Looks To Have Just Been Rebuilt!! It acted funny one day on the kart as if it had something wrong with the carb or a timming issue, I took motor off a replaced with aq clone an never fooled with it. 275.00
Briggs 5HP Modified Block Du Bushing Cool Bore Eye Brows Done Spring Pockets Cut Lifter Bores Welded Included New Chamfered Valves That Have Been Sealed And Valve Springs Also, Has Horstman Breather Cover With 2 Hose Fittings And Big Bearing Side Cover And Coil..Needs New Bore Job It Is .10 Now..Me Personally I Would Send It To Have A Sleeve Installed.Im Asking $125 Very Nice Machine Work On This Block!!!
Burris Mini Lite Electric Starter Minus Battery $120 WIth A Brand New Battery $175
Prices Do NOT Include Shipping
LOCAL pickup is even better!! In Ypsilanti,Mi around 30 miles from Detroit.. right next too Ann Arbor
ARC BILLET HEAD WITH GIRDLE
http://i307.photobucket.com/albums/nn307/banks2878/101_2966.jpg
CLEMENTS BILLET HEAD
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0004.jpg
ALKY TILLOTSON WITH MANIFOLD AND FILTER ADAPTOR
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0006.jpg
CLEMENTS BILLET FLYWHEEL WITH THE REMOVABLE FINS
http://i307.photobucket.com/albums/nn307/banks2878/101_2964.jpg
CLEMENTS BILLET FLYWHEEL WITHOUT THE REMOVABLE FINS
http://i307.photobucket.com/albums/nn307/banks2878/101_2963.jpg
CLEMENTS ROD WITH .100 PISTON RAN WITH .150 STROKER
http://i307.photobucket.com/albums/nn307/banks2878/101_2970.jpg
ARC 4.475 BILLET ROD WITH P1986 .10 CHROMED PISTON
http://i307.photobucket.com/albums/nn307/banks2878/101_2968.jpg
MODIFIED BRIGGS BLOCK
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0002.jpg
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0003.jpg
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0001.jpg
BURRIS MINI LITE
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0014.jpg
BRIGGS RACING MOTOR 9HAS LOOP HEADER IN PIC BUT WILL BE CURVED)
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0012.jpg
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0010.jpg
http://i307.photobucket.com/albums/nn307/banks2878/IMAG0011.jpg
Last edited: