Old Model Predator 212 Upgrades

[XenonWolf10]

I have a old model predator 212 on my Manco Thunderbird and im planning to do some mods to to increase hp. I already have a header and a bored carb. It is running gas and It will be ungoverned when parts come. I have a pretty low budget of 200$ and am new to doing all of this stuff. I just want someone else who has a little more experience than me to make sure im not about to spend 200$ and have it go to waste. Here is a list of stuff I found and if anyone has any advice on alternate parts or things not working together, Please let me know.:smile:
https://www.OldMiniBikes.com/gx200-clone-air-filter-kit.html
https://www.OldMiniBikes.com/2-pack-of-22lb-valve-springs.html
https://www.OldMiniBikes.com/billet-rod-hf-predator-212cc.html
https://www.OldMiniBikes.com/predator-212cc-valve-cover-gasket.html
https://www.OldMiniBikes.com/sidecover-gasket-predator-212cc.htmlhttps://www.OldMiniBikes.com/ar3910x-racing-spark-plug.html
https://www.OldMiniBikes.com/clone-gx200-stainless-steel-push-rod.html
https://www.OldMiniBikes.com/8-degree-offset-key.html
https://www.OldMiniBikes.com/mod2-grind-predator-core-dyno-cams.html

 

[OND]

Sounds like a good mild build. If your Predator has a .041 head gasket on it might want to think about this...https://www.OldMiniBikes.com/_010-predator-212-head-gasket.html