Rupp rear drum brake for 1967 Continental

[72shriek]

I have a 1967 Rupp Continental, but the rear brake assembly is totally missing. I have the drum/sprocket part on the correct wheel, but no mechanism or actuator or shoes or anything. What do I need and are there any sources that will work so I can get it back to a drum brake system (running a band brake on the clutch for now)? Has anyone had experience using something from Azusa or does anyone have other sources, parts or advice? Thanks so much,
Mike

 

[72shriek]

I think the 5" one at Allied Lesiure may actually work. Size is right. I'm getting one delivered and I'll report back.

 

[mustangfrank]

I think the 5" one at Allied Lesiure may actually work. Size is right. I'm getting one delivered and I'll report back.

Did you order the whole shebang with the sprocket/drum or just the internal brake?

 

[manchester1]

Check with blackwidowmotorsports. Your go to place for Rupp parts.

 

[creia]

Check with blackwidowmotorsports. Your go to place for Rupp parts.

This is the best way to go right here ^^^^^^^^^^
Michael