Salsbury clutch removel.

[EvilDr235]

A few months ago i bought a Wisconsin AKS engine off a fellow who had a Tote Gote knockoff. The engine came with a large Salsbury clutch on it. I want to remove the clutch, but don't want to destroy it if possible. The clutch appears to be a variable speed unit with a second part it connects to. Any idea how to remove it ? The clutch may have some value to it, so i don't want to ruin it. Help please. On the outer end of the clutch there is two 3/8-24 bolts.

EvilDr235

 

[capguncowboy]

Pictures would help. It just so happens that I started taking apart a Salsbury a couple of weeks ago. It's slow going, and years of corrosion have taken its toll. Like you, I'm attempting to salvage the clutch if at all possible.

This might help a bit. I actually need to update it, but was waiting until I got the back half off

http://www.oldminibikes.com/forum/t...operly-remove-salsbury-500-series-clutch.html

 

[Richard Trotter]

Salsbury removal

Hope this helps

 

[EvilDr235]

Scatter shield ? Sounds like instructions for dismantling a bomb. Thank you for the information.

EvilDr235