1977 Tecumseh HS50, snowblower but has good setup for Mini bike 3/4 standard keyed, drilled and tapped shaft. spring return throttle assy plate, right side front fill fuel tank.
Runs great, I just did a quick service, cleaned externals, checked for damage, cleaned and adjusted points, relocated the kill switch connection to the front "mini bike" location, flushed and cleaned the carb etc.
Starts easy, runs great, crosshatching is good on cylinder with good compression and vales looked good. Nice clean engine with original paint to redo, mod or simply throw on and go.
$120+30 to ship
https://www.youtube.com/watch?v=LUEH6MNOKTI&feature=youtu.be
Runs great, I just did a quick service, cleaned externals, checked for damage, cleaned and adjusted points, relocated the kill switch connection to the front "mini bike" location, flushed and cleaned the carb etc.
Starts easy, runs great, crosshatching is good on cylinder with good compression and vales looked good. Nice clean engine with original paint to redo, mod or simply throw on and go.
$120+30 to ship
https://www.youtube.com/watch?v=LUEH6MNOKTI&feature=youtu.be