cleaned

Had to take some of the toys out so I thought I would share a pic. Garage is done and they are back in. I was going to take the Mustang out for a ride but the brakes are frozen. A project for another day. I guess that is her way of telling me that I don't take her out enough. :shrug:

I picked this 69 Rupp Roadster of Craigslist 2 weekends ago. It's missing the gas tank and the original drive. Still has its original tires. Cleaned up pretty good. I would love to find a tank for it and keep the rest the way it is for now. I spent about 5 hours cleaning it. I removed the Toro...

I picked this up last weekend , It didnt run , both tires were flat. seat was broken, paint is flat from sitting outside . I have a few questions , its it paint or powdercoated ? Looks like paint but not 100% sure . The engine didnt run so I took it off , cleaned the carb , cleaned the rust off...

Good Morning All, I just picked this up last night. I have no idea what it is? It has a 5hp Tecumseh engine. It was missing a kill switch, had fuel in it that looked green, and needed an oil change. After i cleaned the tank and the carb, cleaned the plug, and wired up a crude kill switch, it...

Hey Digger guys, here some of the correct Carlises that came on that bike, problaby work on the sears fielder, and some of the other bird bikes too! Not an easy tire to find I was looking when a cleaned up ther digger I had to no avail. 3 50 x 10 Dirt Bike Mini Bike Tire | eBay The...

Don't know much about it. Came on a bike I got a while back and I'm not using it. Driven has one of the set screw hole broke spring moves freely. Drive is a little rusty but fingers still move and spring back. Can be taken apart and cleaned. 3/4" drive and 5/8" driven $75 for the set. Plus the...

HM80 lighted, came off a tri sport. it is a correct recreational vehicle factory setup engine. Has aluminum flywheel, correct throttle, taylor spark arrestor header/muffler. 1" shaft ball bearing. This engine is very clean, I took all the tins and flywheel off and cleaned it, it had no gummy...

1977 Tecumseh HS50, snowblower but has good setup for Mini bike 3/4 standard keyed, drilled and tapped shaft. spring return throttle assy plate, right side front fill fuel tank. Runs great, I just did a quick service, cleaned externals, checked for damage, cleaned and adjusted points...

Good running little motor. Cleaned it up for my Arco build, but decided on a 4hp. Didn"t sell on Ebay so instead of re listing you'all can have a crack at it. It is already securely crated and ready to ship. Ships at 31lbs. for around $40 in the US. Basically cleaned up and painted. Rebuilt the...

Found these two huddling together in a dark corner of a shed yesterday. Silver H35 ARCO engine. H35-45319H. Clutch still on. Its a 1970. Would this be the correct colors for a Tec on an ARCO bike? Could just be the recoil I suppose. And the other is an Ariens snow blower HS40. Also...

Awhile back one one you guys suggested mixing acetone with something for a finish on metal, I think it may have been linseed oil. It worked great and I need to do it again, can you refresh my memory? Thanks What I am looking for is a finish that will harden but not look shiny, that I can...

I picked these 2 baja's up yesterday. The black one has everything except the motor, and the green one is ready to roll. I have not been able to crank the green one, though. I was told the carburetor just needs to be cleaned. How do I go about doing that? I pulled the carb cover off and...

Hi all, My son has a go-kart we built, with a stock Predator. It sat for nearly a yr. We drained the fuel, cleaned the carb, changed the oil, and it fired right up, BUT, it will only run well with the choke on. It will idle with the choke off, but dies the instant you hit the throttle...

I picked up a Whirlwind roller some time ago. Oddly enough I picked up a 14HP V-Twin Vanguard too. I think they might complement each other nicely. The engine is currently totally disassembled. It has been thoroughly cleaned and will be rebuilt over the winter months. If I do go through...

71 Rupp Roadster 2 4hp lighted Tecumseh engine. Good comp. excellent spark! Pops off of starting fluid. Needs to be cleaned and tuned. Listed here first. 230.00+40.00 to ship

I have a 5 hp power sport engine that was running only if I kept pushing the primer blub. I removed the carb and cleaned out the holes in the bowl bolt that were pluged up. I removed the float and needle and sprayed carb cleaner through all the holes in the carb. I also cleaned out the gas tank...

Getting my NR racing stage 2 clone ready to go on my Warrior. Motor was being used on my son's kart so I took it apart and did some cleaning (degreasing) repainted it and filled it up with fresh oil Used metallic silver and a candy red for colors, will more then likely change out the header...

Got rid of my wife's crap, the kid's toys and some junk to set up the Minibike area. Here are a few pics. Now i can hide down here and not be bothered :001_tt2:

still need to replace fuel line and get her running

It's so often that I read a thread that says "I cleaned the carb up real good and it still just ain't runnin' quite right." In my profession as a small engine tech I hear that line very regularly, then I come home and read it here too. It's great that people want to do things themselves to save...