What is the best 6.5 clone cam for me?

[baja]

baja minibike

hi i have a 6.5hp powerfist engine for my db30 minibike so far the governor system has been taken out and now im looking for some engine mods i have in mind a billet aluminum flywheel/ jet kit/ velocity stack and air filter/ spark plug/ im looking to do a cl1 cam with 10.8# valve Springs do you guys think this is a good set up or should I change to a different cam keep in mind its for a mini bike throttle is on the throttle will be on and off but I would like to have more top end. let me know what you guys think:shrug:

 

[baja]

also i have a race header

 

[predator bike]

the black mamba is definatly a good cam i have a cl1 and 10.8 in my motor in my mini now and it pulls good i would now go over 6600-6700 more than a couple times because it will wair them out so i would get 2 sets. if you start to feel it down on power put the new set in. also billet rod

 

[predator bike]

not go over 6600- 6700

 

[funky ole]

pick up the momba jr cam from tim isky. 26 lbs springs, champion rockers. when i spoke with tim,he said that 18 lbs would also work as long as you don't run extended high rpm.
these are the parts i use in my baja worriors,along with a torque convertor;
.020 cheater stock stroker kit,billet rod,flat top piston with t3 rings
black momba jr cam
billet lifters
chrome moly push rods
26 lbs springs
stainless valves
18cc ported head.
champion old style rocker arms
22 mm carb.
these worriors are beasts!