I finally got around to taking the wheels apart on the homemade mini bike I picked up last month. I think the rear wheel came off a late 50's kart (bases on some pictures I saw on EBay. I a pulled 3/4" axle out of the rear hub. I am not a home to measure it or post up some pictures but, does anyone make a 1 5/8" OD to 5/8" ID bearing? I am trying to cut down costs of these (2) builds for my kids and re-use some vintage parts.
There may be many, I found this in a second..... Usually better if you buy bulk.... At least as many as you need......
1628 2RS Double SEALED Bearing 5 8" x 1 5 8" x 1 2" | eBay
Patch
1628 2RS Double SEALED Bearing 5 8" x 1 5 8" x 1 2" | eBay
Patch
