I wanted to show you a clone that came off of a snowblower that had 110 electric start. I tried to start it but no spark. Removed the flywheel and saw that there was some minor rust on the pickup and coil, and I noticed that it had what looked like a full stator to run the lights, never seen that before? The shroud says it is 208 cc and from 2008, so i guess that is about 5.5 to 6hp. The crank is 3/4 x 3.25 inches long. The carb is too far gone to fool with. I need a pull starter assembly, carb, and the muffler. Parts I had and donated last year, figures. If anyone has these parts they want to sell, let me know. Not a clone guy, but it would be cool to see if it runs. I removed some of the covers over the carb before the pictures.
Attachments
-
2.9 MB Views: 26
-
3.1 MB Views: 32
-
2.8 MB Views: 33
-
2.7 MB Views: 31
-
3.2 MB Views: 25
-
3.7 MB Views: 25