Can't see how UPS would be an affordable way to ship a complete bike even broken down I just ship a lathe part from washington state to pennsylvania 45Lbs the box was 12"X24"x24" and it was $86 Ken
I bought a bc1300 bonanza I pulled the Go Power wheels and all 4 of the bearings sized and been run long enough the the bores were about 1/8" to big so I had to sleeve then Ken
Terry Ives has new 12V manifolds and tops for sale. plus there are some threads about using a mac reed on a wb manifold on the net or you can get the new that us motors has for the hr also you could talk to Dave Bonbright at engine masters a lot of pople think he is the master of the 820 ken
I had one last year that was nice all it needed was a engine what I found out about it they came with 3HP or 5HP briggs in them. your is like the one I had the motor mount slides and it has a fixed pulley clutch and variable driven pulley the later ones had fixed motor mount and a torque...
I had a set of Go Powers off my Bonanza the bearings where real bad and the bearings had anywhere from .010 or so clearance to 1/16 or more in the wheel. In this case the only thing to do is machine the wheel and press a steel sleeve in the wheel. If the clearance is more than a few thousands...
I saw his other items but $42 for a grade 5 5/8" bolt I have found that the bolts on Mini bikes and gokarts most of the time its what they could buy I have a fox kart and the king pin bolt are the same the treads end about 1/2 way up the spindle so the spindle wears and so dose the king pin bolt...
2 guy are duking it out for a Bonzans fork bolt $42 Fork Bolt Original Bonanza Mini Bike BC1200 | eBay when I took the one out of my bc1300 the lower neck bushing had nice threads in it you could move the forks around about 2-3 " I put new bushing in it and got a new bolt that was longer and...
I have 3 briggs and 3 tec motors I would like gone all are missing something $25 for all NO SHIPPING I am 21 miles north of portland or
Ken 360 225 6448
NO SHIPPING 2 5hp briggs 80's motors 1 3hp briggs 80's 2 black 3hp side poppers white 2.5hp rear exhaust missing carb ken
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.