1977

1977 Manco Sears Mini Bike -BEFORE-

1977 Manco Sears Mini Bike -BEFORE-

Picked this Invader from original owner yesterday. He say's he got it new in the late 70's the Tec looks newer. # 's say 35404x A and D.O.M. 7013A would that mean 1977 or 1987? My first TEC and after 5 years of sitting. It fired right up!

I bought a 77 honda xl75 about 3years ago for about 200$ and it ran good, But they pretty much beat on it and made it a fully dirt bike pretty much. It didn't come with turn signals or headlight or brake light, But it has the headlight cup mount and the speedo and has all the wires too...

I have these vintage NOS (new, old stock) never used 1977 North Carolina license plates in their original shipping envelope, never used. Plates available are shown-great shape but a bit grubby from storage and light rust "squiggles" on the back but otherwise nice. Would look great on that...

I am looking to buy a impala 1977 if the price is right, if it runs the better, if it has no back fees the better, and little to no rust, also must be a two door, and if possible all stock, if you know anyone or have one tell me. text 310-559-4339 send pics to 310-779-8728

1977 Montgomery Ward Mini Bike 5hp Engine Left Side

1977 Montgomery Ward Mini Bike 5hp Engine Right Side

1977 Montgomery Ward Mini Bike

1977 Montgomery Ward Mini Bike

1977 Montgomery Ward Mini Bike

So a buddy called me and said he was tired of fooling with his nearly completed 1977 z50. Almost everything on the bike has been restored except the engine. It has mint wheels with new tires, foot pegs and kick stand that aren't pictured. I have the original engine that came off the bike that...

Selling a NOS 1977 3hp Briggs. This engine has never had gas or oil put in it. Was sitting on a shelf at a local small engine dealership until I bought it. Dark gray in color. Gas tank interior is completely rust free. 3/4" shaft, keyed, drilled and tapped. I've been holding on to it for...

picked up a briggs 3 hp #80212 with no spark, no shock when turned over and holding wire, cleaned rust off fly wheel. have not cleand points yet, think coil is shot , condenser??? what next? any help would be good thanks

Hi, I'm looking for info about my 1977 Princess Auto minibike. It has a Briggs & Stratton (3hp pull start) and it's stamped on the front plate model ym-h. I can't seem to find any info on these bikes online. It's all original and running and has also been kept inside. Sorry for the dust and...

i got a 1977 trail 70 that was a barn find. Didnt run for years, apparently mice got into the wiring harness and had a feast. I just got the bike running, it runs and drives great!! here are my questions the carb is new, when the bike sits in idle thru 1/2 throttle it runs great, but when...

Does anybody know the size and thread for the drilled and threaded hole on the (clutch) end?:confused:I thought that it was 5/16 - fine thread (same as our newer Tec Powersport), however, I just tried it and that bolt is too small?:shrug: Thank you

Hello i have a quick question about my 70. I have always noticed there being, what looks to be, two drain plugs under the bike where the transmission is. I know the one on the right (if your sitting on the bike) is for the oil but i have always noticed a much smaller drain plug to the left. Is...

I just found this forum, and thought ill show off my new toy.