basics

I've been reading up on a lot of the threads here, and I don't know, but maybe because I was raised by a bunch of gearheads, something that was beat into to me by anyone I learned from was to always check the basics first when you have a problem. And if you have an engine running problem...

I dunno, lately I am losing motivation. I'm not having as much fun as I used to building bikes. When I first got into it, I built POS bikes that ran, and you know what I had more fun with them then the nice and shiny ones I'm building. Don't hear me wrong, there's no way I'm leaving OldMiniBikes or...

Hi guys, I have tried to look for a general thread! The things I need to know seem too basic maybe! I am in the process of rebuilding this bike here: I am putting that old engine away for now (still works, but rough as guts). I will restore it in 10 years or so when I have time lol...

alright so heres the story i got a manco go kart with a powersport 5.0 on it and it wont idle for very long, i see that there is two lines going to the carb one i know is a fuel line. my question is is the othere one a pulse line and if so would it cause poor performance if there was a little...

For learning the basics, check these out: YouTube - Small Engine Lab. 1.wmv YouTube - Small Engine Lab. 2.wmv