chain?

If I bought too large of a chain is there a way i can pop off links and then just use another master link to close it?

I got my current chain when I got the clutch. I got the pair off of the net. Ebay of course. :shrug: It says TRP on it. I think there might be a few bends in it already from just a short amount of time. What is a good chain to get? I am kinda new to this. Thanks Dave

Hey Fellas. I went to put the chain on my Powell today and I bought the wrong size from OldMiniBikes a while back. :facepalm: I had only used #35 before and the Powell chain was bigger, so I told myself, "naturally it must be 41". Nope, I'm still learnin'. So Powell bros, what size chain do I need...

im looking for a small rear sprocket for my mini 50 or 40 tooth. i have 6in azusa rim. im looking for a small back sprocket for racing. i have noticed that all the guys who race have small sprockets but i dont know what type of back rim they are running? all the small sprockets have a 4 hole...

i put the predator motor in my db30 an the dam chain keeps popping off when im at like full throttle or hit a bump .. is there a certain # of link thats should be run with this setup or do i need a whole new chain.. please let me know asap.. thank you

I really want some good chain and from what Ive read and am told the extreme chain from OldMiniBikes is the best for the money. I know I need 2 boxes to do a DB but I need to do 2 bikes. WOuld 3 boxes be enuff for 2 bikes??:shrug: Thats alot of money for a chain, but with my clutch brakes I think...

Is there a general guideline or "rule of thumb" as to the need for a bigger/stronger chain when building an engine for higher HP and RPM? The Ruppster will be rebuilding/modifying an old 1973 Briggs 5HP flathead, and the goal is around 10 HP/6,000 RPM. (Using Jimmy Glenn's excellent book as a...

What do you guys recommend for chain? I want some really good #35 kart racing chain. I like the gold on black look but that doesn't really matter.

Does anyone know what size chain came on a MTD Columbia with a jackstaff because I see it's not.a #35. There are two chains, I thought they were a #35 like on the cat bike I have but they are not.

Anybody using #219 chain on your minibike?

I am waffling between the Gold on Gold chain or just normal chain. Which do people like better and which is a better deal? Is the Black on Black strong enough for a modded 6.5 w/ flat head, porting, rod, governor removed?

will 3 feet be enough? for a minibike? 12-65 ratio

(btw the wheel is 6 inches)(12 inches in diameter)

as above, i got a DB, with a WEN 5.5, what size chain do i need and where can i get one? mine snapped today...is this common?

I have a Whirlwind bike and installed an 8hp Briggs, so I had to move the motor ahead bout 4 inches. Well then the air cleaner hit the frame so I modified that. Now the chain rubs against the frame. Where can I fine some type of idler pulley to mount to the frame so the chain can ride on it. Or...