Looking for a full frame Alsport, any condition. Willing to trade a running ts8 alsport with a newer 420cc 13hp engine and disk brake. Located in south Michigan, willing to travel!
My Roper project is moving very slowly, mostly because I'm dealing with more rust than is worth restoring.
If anyone has restorable condition Roper parts - frame, forks/handlebars in particular, please send me a PM!
Thank you,
Jack
I'm posting these for Mountain Man George so he can make some room in his garage. These are new and have never been used and might have some minor flash rusting from sitting. You can use a flat head, ohv or maybe use a 2-stroke if you want, also they are set up to use a rear band brake. The...
Good and straight frame. Fork bolt hole is egged some but can be fixed. PO put a piece of pipe in right side foot peg but they didn't weld it so it can be pulled out. Has original scrub brake and spring. I have the wheels and can make a deal if buyer wants them. Also will throw in the seat that...
Seen this the other day thought some one might be interested in it. I dont know what it is but i like the frame style it reminds me of a streaker. Anyone know what it is? mini bike frame
Trying to help someone out that wants to restore his bike, He has a 1968 TT500, sometime over the years though It apparently needed the frame fixed or something and a 1969 frame was used (all other parts are '68) far as I know the frame interchanged between all models for that year that were...
Here are the model #HS4055285 Serial# 0232 04641, I looked at what was left of the sticker on the frame but, it was no help. Here are some pics.
Thanks
Tim
$100 and shipping.
Exact year and model is unknown.
Previous owner added foot pegs (something must have happened to the originals), and they were put on crooked so I took them off.
They also welded some angle iron to the bottom of the frame (see 2nd picture), I was able to remove the pieces...
I have decided to build this frame first, but would like to know more about it. Can you see in the pic of the motor mount plate, the left frame tube looks bent to me , but it might have been made that way because I can't find any damage or repairs. I think the green on the bottom is the original...
Bonanza front peg BC1000 frame and forks. I'm trying to duplicate my first Bonanza I bought in 1963. The parts can be rusty crusty as I need them for patterns.
Marv W in Bonny Doon Ca.
Hey guy's
What type of tubing are you using to repair/ lengthen/ modify your frames, wall thickness and where can it be purchased.
Getting ready to modify one of my frames, someone at some point cut and removed a two inch section of the back bone. I decided to stretch this frame to make a drag...
You can reduce the height of the gas tank cap on the Predator 212 but taking the cap apart and cutting the white plastic underneath flush with the top of the metal. I have the new Predator 212 CA version with screw in cap. Undo the chain that connects to the screen filter and turn cap upside...
Just picked-up my micro frame at the P.O. from weldking this morning and wanted to send a thanks out to Evan for doing such a nice job on this little baby. Also wanted to thank him for his work in raising those seat straps; that Honda GXH50 fits like a glove. BTW, Evan picked the right...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.